Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha Giggle XF50E Owner's Manual

Turn signal light bulb, replacing<IXE>
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
ZAUM00**
1. Tail/brake light lens
2. Bulb
2. Remove the burnt-out bulb by push-
ing it in and turning it counterclock-
wise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24133 4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise the
lens may break.
2
1
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
[ECA10681]
Front
ZAUM00**
1. Turn signal light lens
2. Bulb
6-57 6-22
by removing the screw.
2
1
EAU1722A
EAU24204
1
2
3
4
5
6
7
8
9