Scooter Care And Storage - Yamaha Giggle XF50E Owner's Manual

SCOOTER CARE AND STORAGE

luted mild detergent with water
may be used. Be sure to rinse off
any detergent residue using
plenty of water, as it is harmful
1
to plastic parts.
● ● ● ● ●
Do not use any harsh chemical
2
products on plastic parts. Be sure
to avoid using cloths or sponges
3
which have been in contact with
strong or abrasive cleaning prod-
ucts, solvent or thinner, fuel
4
(gasoline), rust removers or in-
hibitors, brake fluid, antifreeze or
5
electrolyte.
● ● ● ● ●
Do not use high-pressure wash-
6
ers or steam-jet cleaners since
they cause water seepage and
deterioration in the following ar-
7
eas: seals (of wheel and
swingarm bearings, fork and
8
brakes), electric components
(couplers, connectors, instru-
9
ments, switches and lights),
breather hoses and vents.
● ● ● ● ●
For scooters equipped with a
windshield: Do not use strong
cleaners or hard sponges as they
will cause dulling or scratching.
Some cleaning compounds for
plastic may leave scratches on
the windshield. Test the product
on a small hidden part of the
windshield to make sure that it
does not leave any marks. If the
windshield is scratched, use a
quality plastic polishing com-
pound after washing.
After normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge, and
then rinse thoroughly with clean water.
Use a toothbrush or bottlebrush for hard-
to-reach areas. Stubborn dirt and insects
will come off more easily if the area is
covered with a wet cloth for a few min-
utes before cleaning.
After riding in the rain, near the sea or
on salt-sprayed roads
Since sea salt or salt sprayed on the
roads during winter are extremely corro-
7-62 7-2
sive in combination with water, carry out
the following steps after each ride in the
rain, near the sea or on salt-sprayed
roads.
TIP
Salt sprayed on roads in the winter may
remain well into spring.
1. Clean the scooter with cold water
and a mild detergent after the en-
gine has cooled down. NOTICE: Do
not use warm water since it in-
creases the corrosive action of
the salt.
[ECA10791]
2. Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
1. Dry the scooter with a chamois or
an absorbing cloth.
2. Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts, including the exhaust
EAU25991