Engine Oil - Yamaha Giggle XF50E Owner's Manual

Hide thumbs Also See for Giggle XF50E:
Table of Contents

Advertisement

Engine oil<IXE>
PERIODIC MAINTENANCE AND ADJUSTMENT
To install the spark plug
1. Measure the spark plug gap with a
wire thickness gauge and, if nec-
essary, adjust the gap to specifi-
1
cation.
2
Spark plug gap:
0.7 ~ 0.8 mm (0.028 ~ 0.031 in)
3
2. Clean the surface of the spark plug
gasket and its mating surface, and
4
then wipe off any grime from the
spark plug threads.
5
3. Install the spark plug with the spark
plug wrench, and then tighten it to
the specified torque.
6
Tightening torque:
7
Spark plug:
13 Nm (1.3 m • kgf, 9.4ft • lbf)
8
TIP
If a torque wrench is not available when
9
installing a spark plug, a good estimate
of the correct torque is 1/4~1/2 turn past
finger tight. However, the spark plug
should be tightened to the specified
torque as soon as possible.
4. Install the spark plug cap.
5. Install the panel.
6-42
6-7

Engine oil

The engine oil level should be checked
before each ride. In addition, the oil must
be changed and the oil strainer cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
To check the engine oil level
1. Place
the
vehicle
centerstand. A slight tilt to the side
can result in a false reading.
2. Start the engine, warm it up for sev-
eral minutes, and then turn it off.
1
ZAUM00**
1. Engine oil filler cap
2. Maximum level mark
3. Minimum level mark
EAU1722A
EAUT2592
on
the
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents