Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha C3 2010 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens
1
by removing the screws.
2
3
4
5
ZAUM00**
1. Tail/brake light lens
2. Bulb
6
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
7
terclockwise.
3. Insert a new bulb into the socket,
8 push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
9
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
EAU24133
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1
ZAUM00**
1. Turn signal light lens
2. Bulb
ZAUM00**
1. Turn signal light lens
[ECA10681]
2. Bulb
EAU24204
2
1
1
2
6-25
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise
the lens may break.
[ECA11191]
EAU1722A