Replacing A Front Turn Signal Light Bulb; Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha NEO'S 4 2008 Owner's Manual

Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the centers-
tand.
2. Remove cowling A. (See page
6-6).
3. Remove the socket (together
with the bulb) by turning it coun-
terclockwise.
1
1. Turn signal light bulb socket
4. Remove the burnt out bulb by
pushing it in and turning it coun-
terclockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUT1261 5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
ECA10670
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the cowling.
6-28
Replacing a turn signal light
bulb or the tail/brake light
bulb
1. Remove the lens by removing the
screws.
1. Screw
2. Tail/brake light lens / Turn signal light lens
1. Tail/brake light bulb
EAU24283
6