Test Running; Administration - Husqvarna ZTH5223 Workshop Manual

DELIVERY SERVICING

Test Running

Check that the engine will not start with the park brake engaged.
Check that the engine will not start with the blade engagement button pulled out.
Check that the engine will not start without someone sitting on the driver's seat.
Start the engine.
Check that the engine stops if, with the park brake engaged, a motion control lever is folded inwards (i.e.
across the operator). Test both the left and the right motion control levers.
Check that the engine stops if, with the park brake disengaged, the operator gets up from the driver's seat.
Check that, with the drive in neutral and the park brake disengaged, the mower does not move on flat
ground. Increase the throttle setting - the mower must still remain stationary.
Check that the park brake operates correctly.
Check that the mower moves straight forwards/backwards when both motion control levers are
simultaneously moved an equal distance forwards/backwards.
Check that the mower turns normally when driving forwards and backwards.
Check that the mower deck operates correctly and that there is no abnormal noise.
Check that engine idling speed is 1,550 ±50 rpm.
Check that the speed regulator gives a maximum engine speed of 2,800 ±75 rpm.

Administration

Fill in the sales certificate and customer
register, etc. Remember to fill in the serial
number on page 4 and to sign the delivery
service in the Operating Instructions.
24
English-