Maintenance Schedule - Husqvarna ZTH5223 Workshop Manual

Zth series ride-on lawn mower
Hide thumbs Also See for ZTH5223:
Table of Contents

Advertisement

DELIVERY AND DEALER SERVICE

Maintenance Schedule

The table below lists the maintenance required by the ride-on mower. Several of the points not covered in
this workshop manual will be found in the Operating Instructions.
Maintenance
Check for fuel and oil leaks.
Check the park brake.
Check engine oil level (every fueling).
Check the fuel pump air filter.
Check the safety systems.
Check/clean the engine's cold air intake.
Check the mower deck.
Check fasteners (bolts, nuts, etc.).
Start engine and blades; check for abnormal
noise.
Clean the underside of the mower deck.
Check hydraulic system oil level.
Check the condition of belts, pulleys, etc.
Check for any damage.
Check tire pressure.
Clean thoroughly around the engine.
Clean thoroughly around the hydraulic system.
Clean thoroughly around belts, pulleys, etc.
Lubricate mower deck belt tensioner.
Lubricate belt tensioner for hydraulic pumps.
Lubricate all wires.
Lubricate driver's seat mechanisms.
Lubricate the throttle control.
Clean the engine's cold air intake.
Lubricate mower deck links.
Lubricate front wheel mounts (every 200 hours).
Lubricate front wheel bearings.
Lubricate the shafts of the motion control levers.
Lubricate mower deck struts.
Lubricate the mower deck's height regulator.
Daily
Weekly
Page Pre-
After
use
use
-
-
21
-
-
-
38
-
-
-
22
38
-
20
-
53
-
-
-
-
-
-
-
-
-
-
-
-
-
At
Maintenance intervals
least
in hours
once
25
50
100
300
a
year
English-
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zth6125

Table of Contents