Bluetooth Settings; Registering The Pin Code; Downloading The Phone Book - Kenwood KDC-X998 Instruction Manual

18. Bluetooth settings

18-1. Registering the PIN code

By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Settings" > "Detailed Settings"
Code Edit" using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
3
Input the PIN code
Operation type
Selection of numbers
Movement to the next digit
Deletion of the last digit
Transmission of PIN code
If "Completed" appears and registration is complete.
Exiting from the Bluetooth mode
Press [Ú].
Notes on PIN code input
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
80
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
> "PIN
<3-3. How
13).
Operation
Turn [Control] knob.
Press [F].
Press [E].
Press [Control] knob.

18-2. Downloading the phone book

If the phone book is not downloaded automatically
to this unit to which a cell phone − which is not
compatible with PBAP − is connected, download it
in the following manner:
1
Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2
Select "Settings" > "Transfer Phonebook"
using [Control] knob.
For how to use [Control] knob, refer to
to select the item> (page
When downloading starts, "Downloading ###"
appears.
When downloading is completed, "Completed"
appears.
Exiting from the Bluetooth mode
Press [Ú].
Maximum number of phone numbers that can be
registered
• Of all registered mobile phones, a total of 400 phones
number can be registered.
• Up to 32 digits can be registered for each phone number
along with up to 32* characters representing a name.
(*32: Number of alphabetical characters. Fewer characters
can be input depending on the type of characters.)
Cancellation of downloading
• To cancel downloading of the phone book data, operate
the cell phone.
<3-3. How
13).