Station Name Preset (Snps) - Kenwood KDC-9011 Instruction Manual

Tuner features
Station Name Preset (SNPS)
2 Press the NAME.S button for at least two seconds.
"NAME SET" is displayed once the station name preset mode
is entered.
The cursor will blink in the position where letters are entered.
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ Z
»
u
Si
¢
Special characters: & 4 é ai
oa 7
i u
Ti6s6uaaq $
- &
oo
AGS >
e You can assign names to up to 32 FM stations and 16 AM
stations.
* All the station names will be erased if you press the RESET.
button. :
¢ lf you want to change the name of a station, first display the
name of the station (following steps 1 and 2 above), then
change the letter(s) that you want by following steps 3 and 4.
Station Name Preset Play (SNPP)
(Function of Remote:
1 Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play
mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds. each:
pe EMI +> FM2< EMS <2 AM)
Each time you press the I button, the station display
switches in the forward direction. :
Each time you press the td button, the station display
switchés in the reverse direction,
The program service name will appear for RBDS stations.
Changing the Displayed Band
—4—