Table of Contents
Advertisement
IrT
IiimJ
Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [Hold]. To
not have the image displayed, set [Off].
' 1
Select [Review time].
~
Under the [01"] tab, select [Review
time], then press
<
@
>.
Set the desired time.
~
Turn the
<
0>
dial to select the
setting, then press
<@>.
[:iJ
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
56
Advertisement
Table of Contents
