Table of Contents
Advertisement
I:i!il3:m.l
Setting the Flash"*
.PPlIUII. . . . . ._ _I . .
The built-in flash and external Speedlite settings can be set with the
menu. The [External flash ***] menu options for external Speedlites are
applicable only to an attached EX-series Speedlite compatible with
the respective functions.
The setting procedure is the same as setting a camera menu function.
[Flash firing]
Rash control
Flash firing
Enable
Built-in flash func. setting
External flash func. setting
External flash C.Fn setting
Select [Flash control] .
.
~
Under the [0·] tab, select [Flash
control], then press <
@
>.
~
The flash control screen will appear.
€+
Normally, set this to [Enable].
~
If [Disable] is set, both the built-in
flash and external Speedlite will
I
not fire. This is useful when you only
want to use the AF-assist beam.
[Built-in flash func. setting] and [External flash func. setting]
The [Built-in flash func. setting] and [External flash func. setting]
menus can set the functions listed on the next page. The functions
displayed under [External flash func. setting] will vary depending on
the Speedlite model.
Built-in flash func. setting
Flash mode
E - TTL II
Shutter sync.
1st curtain
~exp.
compo
-3..2..
1..~
..
1..2.~3
E-TIL II
Evaluative
Wireless func.
Disable
mII!l
Clear flash settings
1f$
Select [Built-in flash func. setting]
or
[External flash func. setting].
~
The flash functions will be displayed.
The functions not dimmed can be
selected and set.
115
Advertisement
Table of Contents
