Table of Contents
Advertisement
AF:
Selecting the AF Mode {[
AF point
Focus confirmation light
One-Shot AF for Still Subjects
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
~
When focus is achieved, the AF point
which achieved focus will be
displayed, and the focus confirmation
light
<.
>
in the viewfinder will also
light.
~
With evaluative metering, the
exposure setting will be set at the
same time focus is achieved.
~.
While you hold down the shutter
button halfway, the focus will be
I
locked. You can then recompose the
shot if desired.
~
In the
P lTv
I
Av
IM/B shooting
modes, AF is also possible by
pressing the
<
AF-ON
>
button.
~~
CD
ONE SHOT
"- ~
0
[i]
~
If focus cannot be achieved, the focus confirmation light
<e>
in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try to
focus again. Or see "When Autofocus Fails" (p.92).
i@
If the
[~.
Beep] menu is set to [Off], the beeper will not sound when
focus is achieved.
85
Advertisement
Table of Contents
