Table of Contents
Advertisement
Turning on the Power
~--.r-
--~-------
<
ON
> :
The camera turns on.
<OFF> :
The camera is turned off and
does not operate. Set to this
position when not using the
camera.
About the Automatic Self-Cleaning Sensor
• Whenever you set the power switch to
<ON>
or
<OFF>,
the sensor
cleaning will be executed automatically. During the sensor cleaning,
the LCD monitor will display <
.+D
>.
Even during the sensor
cleaning, you can still shoot by pressing the shutter button halfway
(p.35) to stop the sensor cleaning and take a picture.
f$
If you repeatedly turn the power switch
<ON >/< OFF>
at a short
interval, the
<"0' >
icon might not be displayed. This is normal and
not a problem.
About Auto Power Off
Iff
To save battery power, the camera turns off automatically after about
1 minute of non-operation. To turn on the camera again, just press
the shutter button halfway (p.35).
~
You can change the auto power-off time with the menu's
[~.
Auto
power off] setting (p.44).
[II
If you set the power switch to
<
OFF>
while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
27
I
Advertisement
Table of Contents
