Pioneer GM-D8500M Owner's Manual page 13

( Additional information ')
,
/
Specifications
Power source 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system Negative type
Current consumption 27 A (at continuous power,
40)
Average current drawn ......... 7.5 A (4 0 for one channel)
15 A (2
n
for one channell
Fuse " 30 A x 2
Dimensions (W x H x D) 310 mm x 56 mm x 200
mm
(1 ft.
x
2-1/4 in.
x
7-7/8 in.)
Weight 2.8 kg (6.2 Ibs)
(Leads for wiring not in-
cluded)
Maximum power output ....... 600 W x 1 (40) / 1 200 W x
1 (20)
Continuous power output ... 300 W x 1 (at 14.4 V, 4
n,
20
Hz to 240 Hz, ~ 1% THO)
600 W x 1 (at 14.4 V, 2
n,
50
Hz,
~
1% THO)
Load impedance 40 (2
n
to 80 allowable)
Frequency response 10 Hz to 240 Hz (+0 dB,-3
dB)
Signal-to-noise ratio 80 dB (IHF·A network)
Distortion " 0.3 % (10 W, 100 Hz)
Low pass filter:
Cut off frequency 40 Hz to 240 Hz
Cut off slope ".....".." -12 dB/oct
Bass boost:
Frequency 50 Hz
Level ".O dB to 12 dB
Gai n control:
RCA 200 mV to 6.5 V
Speaker 0.8 Vto 26 V
Maximum input level/impedance:
RCA 6.5 V/ 22 k!"2
Speaker 26 V/90 k!"2
Appendix
(~----~).
m
;:,
ce.
Power output 300 W RMS x 1 Channel (at
~
14.4 V, 4
n,
20 Hz to 240 Hz
and
~
1 % THD+N)
600 W RMS x 1 Channel (at
14.4 V, 2
n.
50Hz and
~
1 %
THO+N)
SIN ratio 54 dBA (reference: 1 W into
40)
mNotes
• Specifications and the design are subject to
modifications without notice.
• The average current drawn is nearly the maxi·
mum current drawn by this unit when an
audio signal is input. Use this value when
working out total current drawn by multiple
power amplifiers.
[!J
En
®