Redial Stack - AT&T 1040 User Manual

NOTE: If the desired
redial number has more
than 16 digits, the screen
will display only the first
14 digits.
Telephone operation
Basic phone operation

Redial stack

Use this feature to review the numbers in the
redial memory and dial one of them if you wish.
(The last six numbers dialed from this extension
are automatically stored in the redial memory
stack.)
1. When the phone is idle, press [(AUTO) REDIAL].
Press [ ] or [ ] to scroll through the last six
2.
numbers dialed at this extension.
3. When the desired number displays, press
[ENTER] twice to dial the call.
NOTE: While reviewing the numbers in the redial
stack, if you want to place a new call other than
the displayed number, you need to press and hold
[ENTER], or wait for 30 seconds to return to idle.
• To delete a redial number:
1. While the redial number displays, press
[ENTER].
2. Press [ ] or [ ] to highlight REMOVE.
3. Press [ENTER] to delete the number. Once
deleted, the entry cannot be retrieved.
• To store a redial number in a one-touch key:
While the number displays, press [ENTER].
1.
2. Press [ ] or [ ] until you see COPY TO 1-
TOUCH. Press [ENTER].
3. Press a one-touch key or press [LOWER],
then a one-touch key (page 36).
• To exit, press
17
[(AUTO) REDIAL].