Panasonic DP-2310 Operating Instructions Manual page 17

[For DP-2310/3010]
External Telephone Jack
You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.
Telephone Line Jack
Plug one end of the
telephone line cable into
the telephone jack supplied
by the telephone company
and the other end
into the LINE jack
on the left side of the machine.
(Refer to the Dialling Method.
See page 126.)
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
RX
LINK
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable
is defective (contains breaks).
Ethernet LAN
(10Base-T/100Base-TX)
Cable (Not included)
Telephone Line
Cable Adapter
Power Switch
After connecting all cables
and the Power Cord, turn the
Main Power Switch on the Back
and the Power Switch
on the Left Side of the machine
to the ON position.
Telephone Jack
17