The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be replaced or
refilled with ink.
[For DP-3510/4510/6010]
To remove the stamp
1
Open the ADF Input Tray.
5
[For DP-2310/3010]
To remove the Stamp
1
Open the ADF Input Tray.
NOTE
158
Problem Solving
Verification Stamp
1.
2.
Verification Stamp Order No.:
1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp.
2
Open the Inner Cover with holding
the green-labeled tab.
Remove by pulling the Stamp Assembly upward.
Remove the Stamp. Replace the stamp with a
new one or refill the stamp with a few drops of the
specified ink into the back of the stamp.
DZHT000027
(for USA and Canada)
DZHT000004
(for other countries)
2
Open the ADF Exit Cover.