Blade.control.lever; Bypass.linkage - Husqvarna RZ19 CE / 966658901 Operator's Manual

Blade Control Lever
To engage the mower blades, slowly lift the lever up
and into the the lock notch.
WARNING!
No adjustments or maintenance to be
carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
Bypass Linkage
Transaxle bypass linkages must be engaged when
pushing or pulling the mower. The release levers are
located on each side of the rear of the unit below
the rear engine plate. See Manual Transport in the
Operation section.
22
ContRoLs
Mower deck blade control lever in the disengaged position
Set bypass linkages into slots on both sides
8058-074
8050-018