Blade Control Lever; Bypass Linkages - Husqvarna RZ4219 BF Operator's Manual

CONTROLS
Blade Control Lever
To engage the mower blades, slowly lift the lever up
and into the the lock notch.
WARNINGt
No adjustments or maintenance to be
carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
8058-074
Mower deck blade control lever in the disengaged position
Bypass Linkages
When pushing or pulling the mower, be sure to
engage the EZT Hydrogear bypass linkages. The EZT
bypass linkages are located on the rear of the frame,
below the rear engine guard.
See Moving Machine By Hand in the Operation
section.
Set bypass linkages into slots on both sides
8050-018
22