Blade Control Lever; Bypass Linkages - Husqvarna RZ4219 Operator's Manual

CONTROLS
Blade Control Lever
To engage the mower blades, slowly lift the lever up
and into the lock notch.
WARNINGt
No adjustments or maintenance to be
carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
8058-074
Mower deck blade control lever in the disengaged position
Bypass Linkages
When pushing or pulling the mower, be sure to
engage the EZT Hydrogear bypass linkages. The EZT
bypass linkages are located on the rear of the frame,
below the rear engine guard.
See Moving Machine By Hand in the Operation
section.
,_ WARNINGt
Bypass linkages are located close to the
muffler. To prevent burns, the engine
should be shut off and allowed to cool
before the bypass linkage levers are
handled.
Set bypass linkages into slots on both sides
8050-018
22