Changing The Digital Security Code - Uniden SS E15 Series Owner's Manual

Changing the Digital Security Code

To protect you against misbilled calls which might result from your phone being
activated by other equipment, the cordless phone provides AutoSecure (which
electronically locks your phone when the handset is in the base) and Random
Code digital security (which automatically selects one of over 262,000 digital
security codes for the handset and base).
If the handset battery pack is completely discharged or the battery pack is
removed, the digital security code will be lost. If this happens, a new security
code is set automatically the next time the battery pack is charged.
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary. The first time you
charge your handset, the security code is automatically set.
In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code.
1) Remove the handset from the base unit. Press and hold the find handset key
on the base.
2) While holding the find handset key, place the handset in the base unit, and
leave the handset on the base for more than 3 seconds. A new random
security code is set.
[31]