Changing The Digital Security Code - Uniden DXAI5588-2 Series Owner's Manual

Changing the Digital Security Code

To protect you against misbilled calls which might result from your phone being
activated by other equipment, the cordless phone provides AutoSecure
electronically locks your phone when each handset is in the cradle) and Random
Code TM digital security which automatically selects one of over 262,000 digital
security codes for each handset and the main base.
If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically the next time the battery pack is charged. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code.
1) Remove the handset from the cradle. Press and hold the find hs key on the main
base.
2) While holding the find hs key, place the handset in the main base, and leave the
handset in the main base for more than 3 seconds.
3) Remove the handset from the main base. Then place the second handset in the
main base and wait for more than three seconds. No need to holding the find hs
key this time.
4) Press the talk/flash key on one handset. Once you make sure
the display, press the end key. Then, try with the second handset. If each
handset displays
and try again.
www.uniden.com
, a new security code is set. Otherwise, return to step 1
C H A N G I N G T H E D I G I T A L S E C U R I T Y C O D E
TM (which
appears on
[ 49 ]