Changing The Digital Security Code; Chain Dialing - Uniden EXP 4241 Series Owner's Manual

up050.fm Page 7 Tuesday, October 5, 2004 4:12 PM
Dialing a Stored Number
1) When the phone is in standby mode, press the talk key, and listen for a dial tone.
2) Press the memory key and enter the speed dial entry (0-9) that has the stored number you
want to dial. (If you enter a digit that does not contain a stored number, the handset will
beep rapidly, and the phone will not dial.)

Chain Dialing

The speed dial memory is not limited to phone numbers. You can store any number (up to 20
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
For example, you can save your bank account number to speed dial memory. When you call
your bank's telephone teller service and are prompted to enter your account number, simply
press the memory key and the speed dial number where you stored your account number.
Erasing a Stored Number from Memory
1) With the phone in standby mode, press the memory key twice.
2) Press the number of the speed dial entry. A tone indicates that the stored number is
erased from memory.

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base
unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. In the rare
situation that you suspect another cordless telephone is using the same security code, you
can change the code.
1) Remove the handset from the base unit. Press and hold the find handset key on the
base.
2) While holding the find handset key, place the handset in the base unit. Leave the handset
in the base for more than three seconds. A new random security code is set.
NOTE: If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically next time the battery pack is charged.
Operational Frequency
This cordless phone uses advanced technology which combines 2.4GHz and 900MHz for
enhanced security and clarity.
Frequency 924.516925 – 926.704425 MHz
2,405.155942 – 2,411.718441 MHz
7