Changing The Digital Security Code; Installing The Holster - Uniden ELBT 595 Series Owner's Manual

UP744.book Page 16 Friday, November 5, 2004 4:22 PM

Changing the Digital Security Code

note
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:
1. Perform the "System Reset" options ("De-register the Handset" and "Replacing
the Base Setting") for all the handsets you have (see page 92).
2. Re-register each handset by following the steps on page 14.

Installing the Holster

You must remove the
holster to charge the
handset.
- Line up the groove on the back of the handset with the groove on
the holster. It fits in the holster only one way.
- Slide the phone into the holster.
- Use the spring clip to attach the holster to your belt or pocket.
w w w . u n i d e n . c o m C h a n g i n g t h e D i gi t a l S e c u r i t y C o d e [ 1 6 ]