Camera/Computer Communications - Kodak EasyShare C743 User Manual

If...
Ready light blinks
green.
Ready light blinks
amber.
Ready light blinks
red and camera
turns off.
Ready light glows
steady red.
Ready light glows
steady green.

Camera/computer communications

If...
The computer does
not communicate
with the camera.
www.kodak.com/go/support
Try one or more of the following
I
Camera is operating normally.
I
Wait. Resume picture taking when the light stops blinking and turns
green.
I
Install new batteries
I
Transfer pictures to the computer
camera (page 11), switch image storage locations
a card with available memory
I
Wait. Resume picture taking when the light turns green.
I
Change the image storage location to internal memory
use a different card.
I
Camera is operating normally.
Try one or more of the following
I
Visit www.kodak.com/go/c743support
www.kodak.com/go/c703support.
I
Turn on the camera
I
Install new batteries
I
Connect cable to camera and computer port
I
Install the software
I
Disconnect the USB cable. Close all open applications. Re-install the
software (page
I
Disconnect camera from the computer. Close all software applications,
reconnect camera.
(page 1) or charge rechargeable batteries.
(page
(page
(page 2).
(page 1) or charge rechargeable batteries.
(page 12).
12).
Troubleshooting
13), delete pictures from the
(page
3).
(page
or
(page 13).
25), or insert
25), or
41