Camera Ready Light Status - Kodak EasyShare C743 User Manual

Troubleshooting
If...
Picture is too dark.
Camera does not
recognize
SD/MMC card.
Camera freezes up
when a card is
inserted or
removed.
Memory card full.
Memory card and
internal memory
full.

Camera ready light status

If...
Ready light does
not turn on and the
camera does not
work.
40
Try one or more the following
I
Turn on the flash
I
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
I
Use Fill flash (page
the subject.
I
Increase Exposure Compensation
I
Purchase a certified SD/MMC card.
I
Reformat the card
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Insert a card into the slot, then push to seat
I
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
I
Insert a new card
(page 13), or delete pictures
Transfer pictures to the computer
internal memory (page
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Try one or more of the following
I
Turn on the camera
I
Install new batteries
I
Turn camera off, then back on.
(page 8).
8) or change your position so light is not behind
(page
(page 25).
(page 3), transfer pictures to the computer
(page 11).
(page
25).
(page 2).
(page 1) or charge rechargeable batteries.
www.kodak.com/go/support
22).
(page 3).
13), then format the card or