Water Chemistr Y - Dimension One Spas Chairman II Owner's Manual

WATER CHEMISTR Y

N O T E : The circulation pump and ozone generator will be on while
either jet pump is on and they will remain on for 30 minutes after the
pump(s) turn off re g a rdless of the water temperature.
NOTE: The Dimension One Spas Scrolling Message Center will keep
all programming for 40 years with no power supply and the time of day
for 30 days. This battery back up will not provide power to heat or oper-
ate the spa.
Maintaining proper water chemistry is imperative to maintaining safe
water and preventing possible damage to your spa components.
S T A R T - U P P R O C E DU R E S :
NOTE: If using Vision systems, disregard the steps listed below and fol-
low the start-up procedures in the instructions located in the box with
the purification cartridge.
1) Add stain and scale control, or a similar sequestering agent, such as
Metal Gon.
2) Test and adjust total alkalinity. Run the pump for 1/2 hour at high
speed.
3) Test and adjust pH. Run the pump for 1/2 hour at high speed.
4) Add Sodium Bromide with jets running.
5) Fill and set Bromine floater or Adjustable Bromine Feeder and place
it in the spa water.
6) Shock water with Potassium Peroxymonosulfate with jets running.
7) Add clarifier (you may wish to add clarifier the following day, as the
introduction of stain and scale control with water clarifier may tem-
porarily cloud the water).
8) Run the pump for 1 hour at high speed.
WA T E R QU AL I T Y
1999 Owner's Manual
37