If your motorcycle is stopped with the
ignition switch ON and the engine stop
switch OFF, the headlight and taillight
will remain on, resulting in battery
discharge.
Hazard Switch
The hazard switch ( ) should be used only
when the motorcycle is stopped under
emergency or hazardous condition.
To operate, turn the ignition key to the ON
or
(hazard) position, and press the
hazard switch. The front and rear turn
signals will blink simultaneously until you
press the switch again.
3
Controls & Features
Be sure to turn the switch off when the
hazard warning is no longer required, or
the turn signals will not work properly,
and may confuse other drivers.
(3) hazard switch
Instruments & Controls
(3)
37