Brakes
UNDER SEAT
(rear brake)
(1)
(2)
(1) UPPER level mark
(2) LOWER level mark
1.
Place your motorcycle on its center
stand on a firm, level surface.
2.
Remove the seat (page
144
Servicing Your Honda
90
).
3.
Check the fluid level. It should be
between the UPPER ( ) and LOWER
( ) level marks. If the level is at or
2
below the LOWER level mark, check
the brake pads for wear (page
Worn pads should be replaced. If the
pads are not worn beyond the
recommended limit, have your brake
system inspected for leaks.
Other Inspections
Make sure there are no fluid leaks.
Check for deterioration or cracks in the
hoses and fittings.
1
145
).