4.
Raise the front of the fuel tank (4) and
install the bolt (1) to frame body.
Do not raise the fuel tank higher than the
stopper cable ( ) allows.
5
5.
Insert a pin spanner (6) from the tool set
in the extension bar (7).
6.
Place the base of the extension bar over
the installed bolt and position the pin
spanner so that it supports the fuel tank.
When raising the fuel tank, be careful not
to allow the collars fall down.
Raising the Fuel Tank
RIGHT SIDE
(4)
(5)
(4) fuel tank
(5) stopper cable
(6) pin spanner
(7) extension bar
Servicing Your Honda
(6)
(7)
(1)
99