Honda VFR800A 2005 Owner's Manual page 203

If You Have a Flat Tire
7. Remove the front axle shaft ( ), wheel
and side collar.
Avoid depressing the brake lever
when the wheel is off the motorcycle.
This will force the caliper pistons out
of the cylinders. The result will be
loss of brake fluid. If this occurs, the
brake system will require service. See
your Honda dealer for this service.
LEFT FRONT
(7)
(7) axle pinch bolt
194
Taking Care of the Unexpected
9
(9)
(9) front axle shaft
Installation
1. Reassemble the removed parts in the
reverse order of removal.
Install the side collars and position
the wheel between the fork legs.
Insert the front axle shaft from the
left side, through the left fork leg and
wheel hub.
To avoid damaging the brake pads,
carefully fit both brake discs between
the pads.
2. Temporarily tighten the axle pinch bolts
on the left fork leg until lightly seated.
3. Tighten the axle bolt to the specified
torque:
43 lbf·ft (59 N·m , 6.0 kgf·m)