Honda VFR800A 2005 Owner's Manual page 205

If You Have a Flat Tire
If the feeler gauge inserts easily,
remove it and tighten the left axle pinch
bolt to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
If the feeler gauge cannot be inserted
easily, loosen the left axle pinch bolt
and pull the left fork outward or push
inward to adjust the clearance. Then
tighten the left axle pinch bolt to the
specified torque.
Failure to provide adequate disc-to-caliper
holder clearance may damage the brake
discs and impair braking efficiency.
10. After installing the wheel, apply the
brake lever AND brake pedal several
times, then recheck both discs for
caliper holder to disc clearance. Do not
operate the motorcycle without
adequate clearance.
196
Taking Care of the Unexpected
Check for free wheel rotation after
the brake lever and brake pedal are
released. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
After installing the wheel, operate the
brake lever AND brake pedal several
times until you feel pressure. You
must restore pressure from BOTH the
lever AND the pedal because this
motorcycle is equipped with a Linked
Braking System.
Verify proper brake operation before
riding.
11. Remove the protective tapes from the
front wheel.