Honda VFR800A 2005 Owner's Manual page 140

10. Clean any dirt from around the spark
plug bases.
11. Using the spark plug wrench (
provided in the tool kit, remove the
spark plugs.
FRONT
(front cylinder)
(4) spark plug wrench
4 )
(4)
12. Inspect the electrodes and center
porcelain for deposits, corrosion, or
carbon fouling. If the corrosion or
deposits are heavy, replace the plug.
13. Make sure that a 1.0 mm wire-type
feeler gauge cannot be inserted between
the spark plug gap (
fits in the gap, replace the plug with a
new one.
14.
Make sure the plug washer is in good
condition.
(9)
(9) spark plug gap
Servicing Your Honda
Spark Plugs
9 ). If the gauge
(cont'd)
131