Cutting Height Lift Pedal; Pump Release Valves; Accessories; Cutting Height Adjuster - Husqvarna LZ30, LZ30C Operator's Manual

Cutting height lift pedal

On some models, there is a deck assist lift pedal to aid
in maneuvering the deck lift.
IMPORTANT INFORMATION
In order to obtain an even cutting height it
is important that the air pressure in all four
tires is the same 15 psi (1 bar).

Pump release valves

IMPORTANT INFORMATION
Only rotate the valve ¼ to ½ turn to release
the system.
Tighten the valve moderately.
Do not overtighten the valve when closing.
Overtightening can damage the valve seat.
Pump release valves are located on the pumps. These
valves release the system so the machine may be
moved by hand when not running. Tilt the seat forward
to gain access to the valves. Use a
the valve.

Accessories

For mulching, there is a BioClip attachment
available. The BioClip is mounted underneath
the mower deck and includes control plates and
BioClip blades.
CONTROLS
5
/ " wrench to open
8
BioClip attachment
Lift pedal
Pump release valve
8011-465
8011-507
8011-566
25
-
English