Stopping The Engine; Moving By Hand - Husqvarna LZ30, LZ30C Operator's Manual

Stopping the Engine

Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
1. Disengage the mower deck by depressing the
blade switch.
2. Raise the mower deck by pulling the lifting
lever backward to the transport position.
3 When the machine is standing still, activate the
.
parking brake by pulling the lever backward.
4. Move the throttle to the minimum position
(tortoise symbol). Turn the ignition key to the
stop position. Never use the choke to stop the
engine.
5. Move the steering controls outward.
6. Remove the key when leaving the mower to
prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than "OFF" will cause the battery
to be discharged and the hour meter to
accumulate hours.

Moving by Hand

When pushing or pulling the mower with the engine
turned off,the vent screws on both hydraulic pumps
must be opened ¼ - ½ turn.
WARNING!
No adjustments or maintenance
to be carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated
OPERATION
Disengaging the mower deck
Raise the mower deck
Vent screws on the hydraulic pump
8011-510
8011-753
8011-507
35 35
- -
English English