Husqvarna LZ30, LZ30C Operator's Manual page 37

Maintenance
Check/adjust throttle and choke cables
Check the condition of belts, belt pulleys, etc.
Change the engine oil
Replace the engine oil fi lter (every 200 hours)
Clean/replace the spark plugs
Replace the fuel fi lter
Replace air fi lter (main cartridge)
Check the caster wheels (every 200 hours)
Clean the cooling fi ns
Clean fi ns of oil cooler (Kohler)
Check/adjust the mower deck
Change the hydraulic oil (every 300 hours)
Replace the hydraulic oil fi lter (every 300 hours)
Dismantle and inspect starter
Check the engine valve clearance
Perform the 300-hour service
Lubricate according to Lubrication Schedule
1)
First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
conditions, cleaning and replacement are required more often.
=
Described in this manual
=
Not described in this manual
WARNING!
Before performing any service or adjustment checklist:
• Engage the parking brake.
• Place the Blade-switch in the disengaged position.
• Turn the ignition switch to "OFF" position and remove the key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect the spark plug wire from all spark plugs and place the wire where it
cannot come in contact with the plug.
MAINTENANCE
1)
2)
(every 200 hours)
2)
3)
(every 500 h)
3)
3)
Daily
Before After
3)
Performed by authorized service workshop.
At
Weekly Maintenance interval
least
in hours
once
each
year
25 50 100 300
2)
In dusty
37
-
English