Off-Line Operation - Toshiba RSM 100 Instruction Manual

4.5.2

Off-line Operation

The change of setting data can be prepared both with and without connecting to the relay in
off-line mode.
Without connecting to the relay:
Choose off-line operation by clicking the [Off-line] button on the [Start up] or [Top menu] screen,
and click the [Default set.] button on the [Start up] or [Top menu] screen.
Note1: Use the CD-ROM attached with a relay because the contents displayed is corresponded with
the latest revision of CD-ROM when produced. If not, some setting items may be different.
Note2: An item, which is not displayed in on-line operation, may be displayed in off-line operation.
Note3: In case of GRZ100-∗∗∗B model, save the default setting file in the folder "\Rsm100\dat".
And then the [Setting Relay type] dialog box will appear. Input the relay type, model, CT rating
and frequency, and click the [OK] button.
Note: If not provided with CT rating, select the '---'.
If the input data is no-entry, the following message will appear.
Re-input the data correctly.
When it is correct, the following screen will appear.
⎯ 61 ⎯
6 F 2 S 0 7 1 5