Operation Of Status Menu; Metering - Toshiba RSM 100 Instruction Manual

4.4 Operation of Status Menu

The status menu can be entered only in the on-line operation. Click the [Status] button on the [Top
menu] screen, then the following [Status] screens will appear.
Note: In G1IF4, the [LED/Comm] tab is displayed instead of the [Element] tab.
The status data are extracted every some seconds and overwritten on the screen. However the
access time is different by capacity or type of the using PC.
Note: Move the border line if the part of value isn't displayed in the default width.
The operation on the screen cannot be allowed during the data renewed.
On the left side of the screen, the date and time of the internal clock of the relay are displayed. The
data extraction and clock display can be paused by clicking the [Pause] button and restarted by
clicking the [Restart] button.
4.4.1

Metering

When the [Status] screen is opened, the [Metering] screen appears on the top of the screens as
shown above.
Depending on the relay types, the following metering screen is displayed.
The power system quantities displayed on the screen are on-line data that are received from the
relay, and are renewed at regular time intervals.
Click the [Primary] or [Secondary] button to display the voltage and current values on the
primary side or secondary side.
⎯ 41 ⎯
6 F 2 S 0 7 1 5