Displaying Frequency Spectrum Diagram - Toshiba RSM 100 Instruction Manual

2.5 Displaying Frequency Spectrum
Diagram
This section describes how to display the frequency spectrum diagram of the waveforms.
《Note for Operation》
● The 3-D image in which the graphs with the frequency component on the horizontal
axis and the frequency on the vertical axis are overlaid is displayed.
● Specify the range between 4th cycle or later from the beginning of the waveforms and
the 4th cycle or before the end the waveforms to display the spectrum diagram.
《Operating Procedure》
① On the [Analysis] menu, click [Frequency Spectrum Diagram].
② On the [Set] menu, click [Spectrum Setting].
⎯ 141 ⎯
6 F 2 S 0 7 1 5
2-29