Bosch FCS-320-TM Operation Manual page 65

FCS-320-TM Aspirating Smoke Detector
The current airflow sensor data, smoke level values, various status values and the parameters
configured via the programming software can be read out locally using a laptop. This makes it
much easier to detect altered operation conditions in the event of service being carried out.
The data is read out to the diagnostic appliance via the infrared port of the FCS-320-TM. The
diagnostic appliance can be secured to the aspirating smoke detector with a unit mounting or
be kept in a straight line (± 10°) with the infrared port at a distance of up to 3 m. The supplied
USB cable connects the diagnostic appliance to the USB port of the PC/laptop (see
Figure 4.6).
The data that is read out is stored in the appliance for 72 hours for diagnostic purposes.
Windows 2000 (with the latest service pack) or Windows XP can be used as the operating
system.
NOTICE!
For correct color display, the monitor used and the graphics card must be able to display
more than 256 colors.
Bosch Sicherheitssysteme GmbH
Installing the Aspirating Smoke Detector | en
Operation Guide
65
F.01U.130.928 | 1.0 | 2009.11