Using The Menu - Radio Shack HTX-212 Owner's Manual

19-1125.fm Page 35 Tuesday, August 3, 1999 9:47 AM

USING THE MENU

Your HTX-212 has a menu that lets you select the way some of its func-
tions work. The previous sections have included procedures that access
this menu—this section provides an overview. Follow these steps to use
the menu:
1. Press VFO.
2. Hold F for at least 1 second. FUNC flashes.
3. Press MR. The first menu item appears.
4. Press s or t to select the desired menu option.
5. Rotate TUNE, or press UP or DOWN on the microphone, to select
6. Press MR. The HTX-212 saves the settings.
Menu
Item
SC
Sd
S1
S2
S3
S4
S5
Lb
Ar
SL
SH
to
bp
the option setting. For options that require a frequency (such as
scan skip), you can use the microphone keypad to directly enter the
frequency's last five digits.
Default
Explanation/Available Settings
Option
Scan resume option.
ti
ti— time out in 10 seconds.
Cr— resume after carrier drops.
SE— do not resume scanning.
Scan delay (delay before resume when SC
2.0
is set to Cr). 0.5, 1, 2, or 4.
–– –. – –– Scan skip frequency 1 (frequency for HTX-
212 to skip when scanning VFO).
–– –. – –– Scan skip frequency 2.
–– –. – –– Scan skip frequency 3.
–– –. – –– Scan skip frequency 4.
–– –. – –– Scan skip frequency 5.
Look-back time (how often the HTX-212
4
checks Priority Memory Channel 1 for a
transmission when the alarm is activated).
4, 8, 12, or 16.
Auto reply (controls whether the HTX-212
oFF
transmits a DTMF memory sequence
when it is DTMF paged). oFF or on.
144.000 Lower scan limit. With SH, determines the
VFO scanning range.
148.000 Upper scan limit.
oFF Time-out option (sets whether the HTX-
212 limits transmissions to 3 minutes). oFF
or on.
oN Keytone beep option.
Page #
22
22
21
21
21
21
21
30
33
23
23
25
25
35