Using The Standard Memory Channels; Storing A Frequency; Changing Stored Settings - Radio Shack HTX-212 Owner's Manual

19-1125.fm Page 29 Tuesday, August 3, 1999 9:47 AM

USING THE STANDARD MEMORY CHANNELS

The HTX-212 has 30 standard memory channels where you can store fre-
quently-used frequencies, along with duplex and subaudible tone settings,
for quick access.

Storing a Frequency

1. Press VFO and tune to a frequency you want to store. Set all
2. Press F. Then rotate TUNE, or press UP or DOWN on the micro-
3. Press MR. The HTX-212 beeps twice and stores all settings into

Changing Stored Settings

To change the receive frequency, follow the steps under "Storing a Fre-
quency." Follow these steps to change the transmit frequency or a tone
squelch option without changing the receive frequency.
1. Press MR.
2. Rotate TUNE, or press UP or DOWN on the microphone, to select
3. If you want to turn tone squelch on or off, repeatedly press T-SQL
4. Press F, then press MR. The HTX-212 displays tF and the transmit
5. Rotate TUNE, press UP or DOWN on the microphone, or enter the
6. Press s. The HTX-212 displays tC and the current transmit sub-
7. Rotate TUNE, or press UP or DOWN on the microphone, to change
8. Press s. The HTX-212 displays rC and the current receive subaudi-
9. Rotate TUNE, or press UP or DOWN on the microphone, to change
10. Press MR. The HTX-212 saves the new settings.
duplex and subaudible tone settings, (see "Using Subaudible
Tones" on Page 33), and the transmit power setting.
phone, until the HTX-212 displays the desired memory number to
the left of the frequency.
the selected memory channel.
the memory channel you want to change.
to select the desired tone squelch mode. (See "Using Subaudible
Tones" on Page 33)
frequency, and M-CH flashes.
desired transmit frequency using the microphone's keypad.
audible tone.
the transmit subaudible tone.
ble tone.
the receive subaudible tone.
29