Tuning To A Memory Channel; Checking Priority Channel 1; Scanning Memory Channels; Clearing A Memory Channel - Radio Shack HTX-212 Owner's Manual

19-1125.fm Page 30 Tuesday, August 3, 1999 9:47 AM

Tuning to a Memory Channel

1. Press MR.
2. Rotate M-CH, or press UP or DOWN on the microphone, to select

Checking Priority Channel 1

To have the HTX-212 periodically "look back" at Memory Channel 1 to
check for a transmission, press F then ALM.
The HTX-212 looks back at Memory Channel 1 every 4, 8, 12, or 16 sec-
onds. If there is a transmission, the HTX-212 beeps to let you know to
tune to it, if desired.
Follow these steps to change the look-back time.
1. Press VFO.
2. Hold F for at least 1 second. FUNC flashes. Then press MR.
3. Repeatedly press s until the HTX-212 displays Lb and the current
4. Rotate TUNE, or press UP or DOWN on the microphone, to select
5. Press MR to save the setting.

Scanning Memory Channels

To set the HTX-212 to scan all memory channels, hold MR for at least 1
second. M-CH flashes, and the HTX-212 scans the memories. The HTX-
212 stops when it encounters a transmission. It resumes scanning accord-
ing to the saved scan settings (see "Setting the Scan Options" on Page
21).

Clearing a Memory Channel

You can clear any memory channel except Memory Channel 1 and the
calling-frequency memory.
1. Tune to the memory channel you want to clear.
2. Hold F for at least 1 second. FUNC flashes.
3. Press MR. All settings are cleared from the memory channel.
30
the desired memory channel.
look-back time.
the desired look-back time (4, 8, 12, or 16 seconds).
appears on the display.