Drive Disengagement Lever - Husqvarna 13 AWD Operator's Manual

Release lever Rider 13 C, Rider 13 AWD and
Rider 15 C
In order to move the machine when the engine is
switched off the release lever must be pressed
down and forwards.
Release lever Rider 13 AWD
Rider 13 AWD has one control for the front axle and
one control for the rear axle.
Pull the controls to their end positions. Do not use
an intermediate position.
Rear Axle
• Control pulled out, drive system disengaged.
• Control pushed in, drive system engaged.
Front Axle
The control is positioned on the inside of the left
front wheel.
• Rear control (pulled out), drive system disengaged.
• Front control (pushed in), drive system engaged.
22
– English
DRIVING
Rider 13 AWD rear
Rider 13 AWD front
8009-574
6021-028
6021-029