Cutting Unit; Lift Lever For Cutting Unit - Husqvarna 13 AWD Operator's Manual

Cutting unit

Rider 11 has a cutting unit with rear ejection, i.e. the
grass cuttings are thrown out behind the cutting
unit.
Rider 11 C, Rider 13 C, Rider 13 AWD and
Rider 15 C have a 3-blade BioClip cutting unit.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the lawn.
14
– English
PRESENTATION
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)
6004-009Hy
6021-003
6004-011H
6004-012H