Settings Menu - ResMed S8 AutoSet Vantage User Manual

You enter the detailed menu from the standby (RAMP or SETTLING) screen, by
pressing the Left (menu) key. The SETTINGS menu screen is displayed.
S M
ETTINGS
Select Enter (Left key) on the Settings menu to access the options in this menu.
H
OW TO
Note: EPR may not be available in all regions.
In CPAP mode, your clinician may have set up your device to deliver expiratory
pressure relief (EPR). This can be used to help ease any discomfort you may
experience when breathing out during treatment. There are four settings:
OFF (no EPR)
•
1 (lowest EPR)
•
2
•
3 (highest EPR).
•
If you have access and want to change the EPR setting, scroll to EPR SETTING and
select Change (Left key). Press the Up or Down keys until you see the setting that
you require.
H
OW TO
Scroll to MASK and select Change (Left key). Press the Up or Down keys until you
see the mask type that you require.
The following table shows the setting that should be selected for each mask type.
Table 4: Settings for mask types
Settings
ULTRA
MIR FULL
ACTIVA
SWIFT
MIRAGE
STANDARD
H
OW TO
Scroll to TUBE LENGTH and select Change (Left key). Press the Up or Down keys
until you see the tube length that you require.
24
ENU
C E
HANGE THE XPIRATORY
S M
ELECT THE ASK
Mask
Ultra Mirage Nasal Mask
Mirage Full Face Mask
Mirage Full Face Mask Series 2
Ultra Mirage Full Face Mask
ResMed Hospital Full Face Mask
Mirage Activa Nasal Mask
Mirage Swift Nasal Pillows System
Mirage Nasal Mask
Mirage Vista Nasal Mask
Modular Nasal Mask
Papillon
C T
HANGE THE UBE
P R
RESSURE
T
YPE
L
ENGTH
S
ELIEF ETTING