Change A Stitch; Adjust Stitches In A Program; Sew Your Program; Mirror Entire Stitch Program - Husqvarna Platinum 730 User Manual

lit iii!
hutS
(11,41
Iti/ol)I,sJ)lii
I
Change a Stitch
Any stitch can be changed in
PROG
when the stitch number is shown on
the lnfoDisplay, Simply step through
the stitch
combination
with the arrow
buttons until you
see the
number
of the
stitch you would like to change. and
select the correct stitch to replace
it.
I
I,
U.
cIi 3
1
S
Adjust Stitches in a Program
If you want to aclust a stitch in a pro
grammed stitch combination use the
arrow buttons to step to the stitch. You
can adjust the stitch length and width
and mirror image a stitch.
The adjustments will automatically be
stored in the pernunent memory
Sew your Program
To sew your program, touch
FUNC to
bring up the
REP
mode. Presser foot B is
recommended. A stop is indicated by a
symbol.
To check your stitch sequence. use
the arrow buttons
to move
forwarcls/
backwards in the sequence.
Sew your program on a stabilized piece
of fabric.
.1e
DoCDCDCl1
%_k.. B
&Q
9
Mirror Entire Stitch Program
Mirror image the entire program side
to side in
REP.
The changes will not be
saved in the permanent memory.
O
Jn
L
.U
2—4
OCD.CCI3__1
sa1