The Functions Panel; Reverse/Stop/Fix; Mirror Side To Side; Stitch Length - Husqvarna Platinum 730 User Manual

I
I,s Ifl(
In/oDL'pIa r
—
+
—+
The Functions Panel
f
Reverse
REVERSE
iS
touched to sew in reverse.
When the button is released, Platinum
730 sews fbrwards. The longest reverse
stitch length is 3 mm.
For permanent reverse, touch the
button
twice in quick succession before starting
to sew. The reverse sewing is indicated
by an icon on the InfoDisplay.
Platinum
730
sews in reverse until you
touch the button again.
0
Stop
STOP
is used to conclude a stitch. Your
Platinum 730 fastens the thread and
stops automatically when a stitch or
stitch sequence has been completed.
STOP
is cancelled when you touch the
hutton again or by selecting a new
stitch. When
STOP
is active, an icon is
shown on the InfoDisplay. The stop—Ilinc
tion can also be programmed.
Fix
FIX
is used to tie
off stitches. When the
button is touched, an icon is visible on
the InfoDisplay. By touching the button
again the function can be turned off.
When beginning to sew. Platinum 730
sews a few tie off stitches and goes on
with the selected stitch, Touch
FIX
while
sewing
and Platinum 730 sews a few tie
off stitches and stops automatically.
Mirror Side to Side
Touch this button to mirror the selected
stitch side to side. If this button
is
touched when straight stitch with left
needle position is selected, the needle
position is changed from left to right. If
touched in
REP,
the whole stitch combi
nation is mirrored (see page 26).
+ Stitch length
When you select a stitch, your Platinum
730 automatically sets the best stitch
length. The set length is visible on the
InfoDisplay above the stitch length
button. You can change the stitch length
by touching either the (+) or (-) button.