Threading The Upper Thread; Auxilary Spool Pin - Husqvarna Platinum 730 User Manual

When threadin g the upper thread, make
sure that the presser foot is raised and
the needle is in the up position.
I Pull the spcx)l pin out. Place the
spool on the spx)l pin with spool
holder (follow the instuctions on
previous page). The thread shall reel
clockwise. Push the spool pin back
in.
I bId the thread near the spool using
your right hand, Use your left hand
to bring the end of the thread in
the direction of the arrow on the
machine.
2 Bring the thread into the prelensio n
Auxilary Spool Pin
I
'a,'u on,
I'I,I,,,,,,,,
u)
The auxilarv spool pin is used when
winding a bobbin from a second spool
of thread or for a second spool when
sewing with a twin needle.
When using the auxilary spool pin, place
the large spool holder and a felt pad
under the thread spool.
thread guide (a). Bring the thread
riown between the thread tension
discs (h).
3 Continu e threadin g in the direction
indicated by the arrows. Bring the
thread from the right when threadin g
into the slot on the takeup lever.
4 Pull the thread into the last guide just
above the needle.
5 The needle is threaded from front to
back (see needle threader for further
instructions).
6 Place the thread under the presser
foot and into the thread cutter, pull it
downwa rds to cut it.
EJ