Husqvarna Platinum 730 User Manual page 33

C ire o/ your Pta linu,,, 0
Bobbin Thread Breaks?
Use the stitch length buttons to adjust
• Wind a new bobbin,
the balance. (-) will make the stitches in
• Replace the bobbin in the machine,
the right column closer together (more
check correct threading. page 10
dense).
(+)
will make
the
stitches fur
ther apart (less dense).
• It stitch plate hole is damaged
-
replace stitch plate.
• Clean bobbin area.
By touching the
CLR
button the machine
Bobbin Winds Irregularly?
returns to stitch length/button size
• Check threading for bobbin winding,
mode. The balance setting will remain
until Platinum 730 is turned off.
Wrong Stitch, Irregular or Narrow
Stitches?
Note:
(
)rily the right side
stitch
column
will he idjusteci. Balance
it
to the left
stitch
• Turn machine oft
and on
to reset.
0 ilumn.
• Change needle, rethread top and
bobbin threads. Have your Platinum 730
• Use stabilizer.
Serviced Regularly by your
Husqvarna Viking Dealer!
Machine Sews Slowly?
If you have followed this trouble shoot-
• Check speed ing information and still are having
• Remove stitch plate and brush lint
sewing problems. take the sewing
from bobbin and teeth area.
machine to your dealer. If there is a
• Have the sewing
machine
serviced
it
specific problem,
it
is a great help to
your
dealer.
test sew with your thread on a scrap of
your sewing fabric and bring
it
to your
Machine Will Not Sew?
dealer. A sewing sample will often give
• Put bobbin winder spindle up
into
much better information than words.
sewing position.
Non-Original Parts and Accessories
• Check plugs are all the way into
Fhe Platinum 730 warranty does not
machine.
cover any defect or damage caused by
• ( heck will plug md powcr to will
use
of
non
origin
ml
addcssories or p is
plug.
Unbalanced Buttonholes?
If
neccessary, for speciality fabrics, you
hive the possibility to adjust the but—
nhole balance. To balance the stitch
lensity of the right buttonhole column,
t
nich both arrow buttons at the same
tune until the balance icon is visble on
the I nfoDisplay.